other

50G QSFP28 LR4 10Km 1310nm LC Optical Transceiver

50G QSFP28 LR4 optical transceiver module, support 50Gb/s and up to 10 km transmission on SM fiber, it works in high-speed IDC connection solutions, and 5G network mid-haul solutions, and so on.
  • 产品详细信息

50Gb QSFP28 LR4 10Km 1310nm LC Optical Transceiver

 

Features

 

  • Supports50Gb/s bit rate
  • Lane signaling rate 26.56Gb/s with PAM4
  • Up to 10km over SMF
  • Duplex LC Connector
  • Hot Pluggable QSFP form factor
  • Digital diagnostic monitoring support
  • Single 3.3V power supply
  • RoHS-10 compliant and lead-free
  • Maximum power consumption3.5W
  • All-metal housing for superior EMI performance
  • Case operating temperature:0℃ to+ 70℃/ -40℃ to +85℃


Order information


Product Number

Data Rate(Gb/s)

Wavelength(nm)

Reach(km)

LD

Tx Power(dBm)

PD

Rx Sens(dBm)

Temperature(℃)

RQ-50G-LR4

50

1310nm

10

DFB

-4.5~4.2

PIN

<-8.4

0~70

RQ-50G-LR4-I

50

1310nm

10

DFB

-4.5~4.2

PIN

<-8.4

-40~85

想知道这个产品吗?

发送 信息
留言

如果您对我们的产品感兴趣并想了解更多详细信息,请在此处留言,我们将尽快答复您。

相关产品
50G QSFP28 ER4 50G QSFP+ ER4 40Km 1310nm LC Optical Transceiver
50G QSFP ER4 optical transceiver module, support 50Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, 5G network mid-haul solution, and so on.
Single fiber 100G DWDM MUX DEMUX 40路 (80波) 单纤双向 DWDM 带INTL端口 波分复用设备
IL<5.5dB , 100GHZ DWDM MUX DEMUX, AAWG Technology Multiplexing of 40 Channels over a Single Fiber Bidi Network with Interleaver filter for long distance application Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks
25G SFP28 Transceiver 25G SFP28 DWDM Optical Transceiver
25G SFP28 DWDM optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.
Mechanical Fiber Optical Switch 1x16/1X32/1X64 机械式光开关
Up to 1x64 Mechanical Optical Switch Unmatched Low Cost Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path
业务性能管理-BPM 业务性能管理-BPM
对全网络流量进行实时和回溯分析,及时发现和解决网络上出现的各种问题和隐患,回溯分析网络攻击事件,分析各业务系统性能,有针对性地及时优化业务系统,保障信息系统安全和稳定。
Single Fiber 1310nm-1610nm CWDM MUX DEMUX 8路(16波) 单纤双向 CWDM 带监控口 LGX 盒子模块
CWDM MUX DEMUX,Multiplexing up to 8 ch for single fiber BIDI transmission 1% Monitor Port for Signal Analyzing or Troubleshooting Passive, Protocol Transparent for Ethernet, FC, OTN, SONET/SDH, etc. Fully Compatible with All ITU-T 1G/10G/25G CWDM Optics Applied to Metro, Regional CWDM Networks
800G OSFP DR8 SM MPO12 Optical Transceiver IB 800G OSFP DR8 SM MPO12 Optical Transceiver IB
Features Form Factor: Hot-pluggable OSFP800 form factor Data Rate: Aggregate data rate of 850 Gb/s and Breakout data rate of 106.25 Gb/s Optical Interface: Compliant to 2×400GBASE-DR4 and 8x100GBASE-DR Electrical Interface: Compliant to 2×400GAUI-4 and 8x100GAUI-1 Management Interface: I2C management interface Reach: Up to 500m over MPO/APC single mode fiber Power consumption: 16 W max Operating case temperature: 0 ~ 70 ℃ Power Supply: Single 3.3V power supply Compliance Form Factor: OSFP MSA Rev 5.0 Optical: IEEE802.3cd /IEEE802.3bs Electrical: IEEE802.3ck Firmware: CMIS 5.2 Environment: RoHS Stability: GR-468-CORE Applications 800Gb/s Ethernet Data Center
1x8 600UM-400~2500nm 机械式光开关器件 1x8 600um光纤 400~2500nm 工业级机械式光开关器件 SMA905接头
产品应用 光传输系统中的多路光纤监控 组成光纤及各种光器件的测试系统 多光源/探测器自动换接系统 光传感多点动态监控系统 光测试系统中用于光纤、器件、野外光缆测试 实验室光器件测试研究 组建光纤自愈网络 功能特点 产品具备低损耗、高可靠性 内部器件均选用进口元件,可靠性更好 模块化设计,可灵活嵌入各领域系统 控制方式简单方便易控制 内部电路设计故障自检告知功能
留言
留言
如果您对我们的产品感兴趣并想了解更多详细信息,请在此处留言,我们将尽快答复您。

首页

产品

关于

联系